Ultralight deployable booms for solar sails and other large gossamer structures in space

Future solar sail spacecraft which do not need any rocket motors and propellants are a promising option for long-term exploration missions in the solar system. However, they will require ultralight reflective foils and deployable booms which will allow for the unfolding of huge sails. The achievement of an acceptable ratio of reflective sail area and structural mass, which results in a still small, but significant acceleration under the photon pressure of sunlight, is extremely challenging. The same challenging deployment technique is required for the unfolding of large reflector membranes or antennas (gossamer structures). The key elements are the booms which must be stowable in a very small envelope before they reach their destination in space. Such booms were developed by DLR and have been successfully tested under zero-g-conditions during a parabolic flight campaign in February 2009. It could be convincingly demonstrated that the unfolding process is both controllable and reproducible. The booms consisted of two co-bonded omega-shaped carbonfiber half shells with 0.1 mm wall thickness each and had a weight of only 62 g per meter. Two different deployment technologies were tested, one based upon an inflatable 12 μm thick polymer hose inside the boom, the other one using an electromechanical uncoiling device at the tip of each boom. In the latter case, the uncoiling devices will radially fly away from the spacecraft, such that they become “expendable deployment mechanisms” and their mass does not count any more for the spacecraft mass that needs to be accelerated or actively controlled.     

A low-cost femtosatellite to enable distributed space missions

A new class of distributed space missions is emerging which requires hundreds to thousands of satellites for real-time, distributed, multi-point sensing to accomplish long-awaited remote sensing and science objectives. These missions, stymied by the lack of a low-cost mass-producible solution, can become reality by merging the concepts of distributed satellite systems and terrestrial wireless sensor networks. However, unlike terrestrial sensor nodes, space-based nodes must survive unique environmental hazards while undergoing complex orbital dynamics. A novel sub-kilogram very small satellite design is needed to meet these requirements. Sub-kilogram satellite concepts are developing elsewhere, such as traditional picosatellites and microengineered aerospace systems. Although viable technical solutions, these technologies currently come at a high cost due to their reliance on high-density technology or custom manufacturing processes. While evaluating these technologies, two untapped technology areas became evident that uniquely encompass low cost and mass producibility by leveraging existing commercial production techniques: satellite-on-a-chip (SpaceChip) and satellite-on-a-printed circuit board (PCBSat). This paper focuses on the design, build, and test results of a prototype PCBSat with a prototype unit cost less than $300. The paper concludes with mission applications and future direction.     

Interior Evolution of Mercury

The interior evolution of Mercury—the innermost planet in the solar system, with its exceptional high density—is poorly known. Our current knowledge of Mercury is based on observations from Mariner 10’s three flybys. That knowledge includes the important discoveries of a weak, active magnetic field and a system of lobate scarps that suggests limited radial contraction of the planet during the last 4 billion years. We review existing models of Mercury’s interior evolution and further present new 2D and 3D convection models that consider both a strongly temperature-dependent viscosity and core cooling. These studies provide a framework for understanding the basic characteristics of the planet’s internal evolution as well as the role of the amount and distribution of radiogenic heat production, mantle viscosity, and sulfur content of the core have had on the history of Mercury’s interior. The existence of a dynamo-generated magnetic field suggests a growing inner core, as model calculations show that a thermally driven dynamo for Mercury is unlikely. Thermal evolution models suggest a range of possible upper limits for the sulfur content in the core. For large sulfur contents the model cores would be entirely fluid. The observation of limited planetary contraction (∼1–2 km)—if confirmed by future missions—may provide a lower limit for the core sulfur content. For smaller sulfur contents, the planetary contraction obtained after the end of the heavy bombardment due to inner core growth is larger than the observed value. Due to the present poor knowledge of various parameters, for example, the mantle rheology, the thermal conductivity of mantle and crust, and the amount and distribution of radiogenic heat production, it is not possible to constrain the core sulfur content nor the present state of the mantle. Therefore, it is difficult to robustly predict whether or not the mantle is conductive or in the convective regime. For instance, in the case of very inefficient planetary cooling—for example, as a consequence of a strong thermal insulation by a low conductivity crust and a stiff Newtonian mantle rheology—the predicted sulfur content can be as low as 1 wt% to match current estimates of planetary contraction, making deep mantle convection likely. Efficient cooling—for example, caused by the growth of a crust strongly in enriched in radiogenic elements—requires more than 6.5 wt% S. These latter models also predict a transition from a convective to a conductive mantle during the planet’s history. Data from future missions to Mercury will aid considerably our understanding of the evolution of its interior.     

Lessons learned from the dynamic identification/qualification tests on the ESC-A upper stage model

The dynamic qualification of the new cryogenic upper stage ESC-A of the ARIANE 5 is supported by several tests in order to verify the assumptions and the modeling approach made at the beginning of the development. The stage contains a large amount of equipment such as propellant lines, acceleration rockets, batteries, fluid control equipment etc. For the low frequency domain the verification of the equipment responses in the integrated state was done by a sine vibration test, excited to levels representing the predicted flight loads including a qualification factor. Acoustic tests with the upper stage were performed to verify the random vibration responses in the frequency range up to 2000 Hz. To verify the shock response level induced by stage separation (pyro-shock) a stage separation test was performed. The paper concentrates on the experience made with the modal identification and sine vibration test of the stage. For the sine vibration test an electro-dynamic multi-shaker table was used. It was able to produce the required input precisely up to as specified, not an easy task for a test set-up of 20 tons weight. The paper presents the approach of how the dynamic qualification was reached successfully and highlights the experience accomplished.     

Range Correction Computations for Weapons Dropped from Aircraft

A general set of equations is developed from which the effects of initial condition perturbations upon weapon impact point are readily evaluated. Data are presented to illustrate the accuracy with which predictions can be made. Results obtained from the actual ballistic equations, from the time-varying perturbation equations, and from a time-invariant approximation of the perturbation equations are compared. It is shown that reasonable impact point predictive accuracy can be provited for fairly large changes in initial conditions.     

A novel autonomous low-cost on-board data handling architecture for a pin-point planetary lander

There has been increased interest in the exploration of the Moon in recent years. Pin-point precision landing is highly desirable for future lunar missions. This paper is concerned with the design of the on-board data handling (OBDH) subsystem for the pin-point lunar lander of the Magnolia-1 project, funded by NASA. Four proposed on-board data handling architectures are outlined and compared in terms of power consumption, performance and reliability. Implementation results are presented, which are obtained from prototyping of the flight computer for the optimal OBDH architecture option on a Xilinx Virtex-5 Field Programmable Gate Array.     

Dynamics of the low altitude secondary proton radiation belt

At the interface between the upper atmosphere and the radiation belt region, there exists a secondary radiation belt consisting mainly of energetic ions that have become neutralized in the ring current and the main radiation belt and then re-ionized by collisions in the inner exosphere. The time history of the proton fluxes in the 0.64 – 35 MeV energy range was traced in the equatorial region beneath the main radiation belts during the three year period from 21 February 1984 to 26 March 1987 using data obtained with the HEP experiment on board the Japanese OHZORA satellite. During most of this period a fairly small proton flux of −1.2 cm⁻² s⁻¹ sr⁻¹ was detected on geomagnetic field lines in the range 1.05 < L < 1.15. We report a few surprisingly deep and rapid flux decreases (flux reduction by typically two orders of magnitude). These flux decreases were also long in duration (lasting up to three months). We also registered abrupt flux increases where the magnitude of the proton flux enhancements could reach three orders of magnitude with an enhancement duration of 1–3 days. Possible reasons for these unexpected phenomena are discussed.     

感知"角秒"——ERA 4000系列角度编码器

高效的驱动系统需要精确的位置信息.一种特殊的光栅鼓栅线制造工艺和独特的扫描原理使海德汉新系列的角度编码器具有很高的精度.     

Effects of X2-class solar flare events on ionospheric GPS-TEC and radio waves over Brazilian sector

In this investigation, we present and discuss the effects of 6 X2-class solar flare events in the ionospheric F region over Brazilian sector that occurred during 2013 to 2015. For this investigation, we present the vertical total electron content (VTEC) observations from nearly 120 Global Positioning System (GPS) receivers all over the Brazilian sector for each event. Also, ionospheric sounding observations obtained in São José dos Campos (23.2°S, 45.9°W, dip latitude 17.6°S; hereafter referred to as SJC), under the southern crest of the equatorial ionospheric anomaly (EIA), Brazil, are presented. The observations show that the greatest TEC impact occurs with the EUV fluxes increases lasting for more than one hour and when the solar active region is located close to the solar disc center. We present a detailed study of the efficiency of the EUV flux with wavelengths ranging from 0.1 to 190?nm for the F region ionization. The largest increase of ΔTEC occurs below the magnetic equator line, covering mainly the central, northeast, southeast and south regions, which includes the equatorial ionospheric anomaly (EIA) region. The ionograms show partial or total fade out in the echoes traces observed causing blackouts of radio signals of up to 60?min, which can have serious consequences to technological systems of public and private agencies around Brazilian sector. This study can help to better understand the effects of solar flares in the ionospheric F region.